Concrete Ultra-Light Formwork Frame Panels Manufactuer

FENGHUA  Ultra-Light weight Steel Formwork 

Ultra-light weight steel formwork is a modular Formwork System that uses high-strength lightweight steel frames as the skeleton and pairs them with various panel materials. Its core design concept is "manually operable", aiming to reduce or eliminate the reliance on large lifting equipment (such as tower cranes), thereby enhancing construction flexibility, reducing costs, and accelerating progress.

Core Components

1. Steel Frame (Skeleton)

  Material: High-strength steel (such as S420). This steel is of high strength and can be made lighter and thinner, achieving overall lightweight.

 Surface Treatment: Hot-dip galvanizing. It provides excellent rust and corrosion resistance, significantly extending the formwork's lifespan and allowing for hundreds of reuses, making it highly economical.

2. Panel (Form Liner)

  Birch Plywood: The most commonly used option. It has a smooth surface, is tough, and can produce a flat and high-quality concrete surface. High-quality laminated birch plywood has good water resistance and can be reused multiple times.

  PP Plastic Sheet: A more durable choice. PP sheets are very smooth, do not stick to concrete, are easy to demold and clean, and are highly wear-resistant, with a lifespan far exceeding that of wood panels, capable of producing mirror-like concrete surfaces.

Key Features and Advantages

1. Ultra-lightweight and Manually Operable

  Each formwork panel is light (typically two workers can easily carry and install it), which is its core advantage. It breaks the traditional limitation of large Formwork Systems that must rely on tower cranes, making it particularly suitable for projects with limited space or no tower cranes (such as low-rise buildings, basements, and renovation projects).

2. Fast Assembly and High Construction Efficiency

     Simple and Reasonable Design: Modular design with standardized components, assembly is like "building with blocks".

     Specialized Connectors: Such as the "self-aligning formwork connector" you mentioned, which can quickly align and fix the formwork, reducing adjustment and alignment time, and eliminating the need for additional reinforcement steps.

     Flexible Tie Rod Options: Provides a variety of tie rod setting schemes, allowing workers to quickly adapt to specific structural characteristics and further shorten formwork assembly time.

3. Sturdy and Durable with Good Economy

    Strong Structure: The high-strength steel frame ensures that the formwork system has sufficient strength and rigidity during concrete pouring, is not prone to deformation, and guarantees construction safety and quality.

   High Reuse Rate: The hot-dip galvanized steel frame and durable panels (especially PP sheets) enable the entire system to be reused hundreds of times, with a very low cost per use, making it highly economical in the long run.

4. High-quality Concrete Surface Finish

 Due to the high flatness of the steel frame and the quality of the panels, the system has good overall rigidity, resulting in a smooth, flat, and aesthetically pleasing concrete surface, reducing the need for subsequent plastering and other finishing work, and achieving a "raw concrete" effect.

5. Flexible and Wide Application

  it is highly versatile and can be used for the pouring of various concrete structures such as walls, columns, and foundations. 

  It can be used for small, scattered components or connected to form large wall surfaces.

Typical Application Scenarios

1.Residential and Commercial Buildings: Especially for mid- and low-rise buildings.

2.Infrastructure Projects: Pipe corridors, bridge piers, retaining walls, etc.

3.Industrial Buildings: Factories, warehouses.

4.Renovation and Addition Projects of Old Buildings: These sites often have limited space, making it difficult for large equipment to enter.

Factory Introduction:

Rizhao Fenghua Scaffoldings Co.,Itd.is one of the biggest manufacturer for Scaffolding and Formwork Systems in China.All of our products are produced as per European standard, American standard and Australian standard.Founded in 1953, started couplers and scaffolding since 1995,nearly 30 years,our products are widely used in the mining, construction, petrochemical andeven industries, Nuclear power Plant, Shipbuilding all over the world: especiallyin whole Europe, Australia, U.S.A., Canada,South American countries.We have gotten the CE certificate EN12811-1:2003 and Australian Scaffolding.Certificate for this type ringlock Scaffolding System

Why choose us:

We are a manufacturer, and we have reached long-term cooperation with many countries in Europe, America and Asia, and have rich export experience.RFH has professional technicians to provide technical support for your

customized products and provide you with suggestions according to the actual situation to ensure that the products meet your expectations.Products Quality are Guaranteed with ISO9001 & CE Certificate.Strong production strength, the factory covers an area of more than 100,00squarmeters,shortdelivetime

Hot sale products

We mainly produce below products:

1.Ringlock Scaffolding systems

2.Kwikstage Scaffolding systems

3.Wall Formwork AND Floor FORMWORK

4.Formwork Accessories

5.Scaffolding Couplers

6. Frame System: M-Frame,H-Frame

7. Metal Plank,Catwalk,Toe Board

For more information,please contact

Attn:Ms Sally Qin

MP/WeChat:0086-15898997661

RFH factory is your smart choice.